Industrial robots, originally desig

Industrial robots, originally designed only to perform simple tasks in environments dangerous to human work¬ers, are now widely used to transfer, manipulate, and position both light and heavy workpieces performing all the functions of a transfer machine.
In the 1920s the automobile industry for the first time used an integrated system of production. This method of production was adopted by most car manufacturers and became known as Detroit automation.
The feedback principle is used in all automatic-con¬trol mechanisms when machines have ability to correct themselves. The feedback principle has been used for centuries. An outstanding early example is the flyball governor, invented in 1788 by James Watt to control the speed of the steam engine. The common household ther¬mostat is another example of a feedback device.
Using feedback devices, machines can start, stop, speed up, slow down, count, inspect, test, compare, and measure. These operations are commonly applied to a wide variety of production operations.
Computers have greatly facilitated the use of feedback in manufacturing processes. Computers gave rise to the development of numerically controlled machines. The motions of these machines are controlled by punched paper or magnetic tapes. In numerically controlled ma¬chining centres machine tools can perform several dif¬ferent machining operations.
More recently, the introduction of microprocessors and computers have made possible the development of computer-aided design and computer-aided manufacture (CAD and CAM) technologies. When using these systems a designer draws a part and indicates its dimensions with the help of a mouse, light pen, or other input device. Af¬ter the drawing has been completed the computer automatically gives the instructions that direct a machining centre to machine the part.
Another development using automation are the flex¬ible manufacturing systems (FMS). A computer in FMS can be used to monitor and control the operation of the whole factory.
Automation has also had an influence on the areas of the economy other than manufacturing. Small comput¬ers are used in systems called word processors, which are rapidly becoming a standard part of the modern office. They are used to edit texts, to type letters and so on.
Automation in Industry
Many industries are highly automated or use automa¬tion technology in some part of their operation. In com¬munications and especially in the telephone industry dialing and transmission are all done automatically. Rail¬ways are also controlled by automatic signaling devices, which have sensors that detect carriages passing a par¬ticular point. In this way the movement and location of trains can be monitored.
Not all industries require the same degree of automa¬tion. Sales, agriculture, and some service industries are difficult to automate, though agriculture industry may become more mechanized, especially in the processing and packaging of foods.
The automation technology in manufacturing and as¬sembly is widely used in car and other consumer product industries.
Nevertheless, each industry has its own concept of automation that answers its particular production needs

Результаты (русский) 1:

Industrial robots, originally designed only to perform simple tasks in environments dangerous to human work¬ers, are now widely used to transfer, manipulate, and position both light and heavy workpieces performing all the functions of a transfer machine.In the 1920s the automobile industry for the first time used an integrated system of production. This method of production was adopted by most car manufacturers and became known as Detroit automation.The feedback principle is used in all automatic-con¬trol mechanisms when machines have ability to correct themselves. The feedback principle has been used for centuries. An outstanding early example is the flyball governor, invented in 1788 by James Watt to control the speed of the steam engine. The common household ther¬mostat is another example of a feedback device.Using feedback devices, machines can start, stop, speed up, slow down, count, inspect, test, compare, and measure. These operations are commonly applied to a wide variety of production operations.Computers have greatly facilitated the use of feedback in manufacturing processes. Computers gave rise to the development of numerically controlled machines. The motions of these machines are controlled by punched paper or magnetic tapes. In numerically controlled ma¬chining centres machine tools can perform several dif¬ferent machining operations.More recently, the introduction of microprocessors and computers have made possible the development of computer-aided design and computer-aided manufacture (CAD and CAM) technologies. When using these systems a designer draws a part and indicates its dimensions with the help of a mouse, light pen, or other input device. Af¬ter the drawing has been completed the computer automatically gives the instructions that direct a machining centre to machine the part.Another development using automation are the flex¬ible manufacturing systems (FMS). A computer in FMS can be used to monitor and control the operation of the whole factory.Automation has also had an influence on the areas of the economy other than manufacturing. Small comput¬ers are used in systems called word processors, which are rapidly becoming a standard part of the modern office. They are used to edit texts, to type letters and so on. Automation in IndustryMany industries are highly automated or use automa¬tion technology in some part of their operation. In com¬munications and especially in the telephone industry dialing and transmission are all done automatically. Rail¬ways are also controlled by automatic signaling devices, which have sensors that detect carriages passing a par¬ticular point. In this way the movement and location of trains can be monitored.Не все отрасли необходимо в одинаковой степени automa¬tion. Продажи, сельского хозяйства и некоторых отраслей сферы услуг трудно автоматизировать, хотя сельское хозяйство Промышленность может стать более механизировано, особенно в области обработки и упаковки продуктов питания.Технологии автоматизации в производстве и as¬sembly широко используется в автомобиле и других потребительских промышленности.Тем не менее каждая отрасль имеет свою собственную концепцию автоматизации, которая отвечает его потребности производства